Trailer hub assembly # AKIHUB-440-2-1K includes one hub, both races (already installed) the inner and outer bearing, one grease seal, one grease cap, and 4 lug nuts. view full answer...
The inner and outer bearings, races, seals and cap are all included. We carry three spindles that will fit this hub. The differences is the shanks that are to be welded to the axle, but the machined portions will fit the hub assembly you were looking at.
The spindles are part # TRU94FR, part # TRU59FR, and part # TRU97FR. view full answer...
The trailer hub, # 84545UC1-EZ, comes with the races installed, but you will need to perform the rest of the installation. It comes with the bearings, seal, and cap. I have included a link to a video that shows how to pack trailer bearings before installation into the hub. You can use a grease like # L54FR. We also have a bearing packer, # L70025. I have included a link to a video that shows how it works. view full answer...
The Bearing Kit # BK1-150 contains the bearings, races and grease seal commonly found on a BTR Spindle.
The Bearing Kit # BK1-100 contains the bearings, races and grease seal commonly found on a BT8 Spindle.
It appears that your spindle on your 2002 Karavan PWC Trailer uses a combination of the two kits. As we do not have an exact kit with the components that you need you can acquire all the parts individually. You will need the following parts for both hubs on your axle.
4- # L44649... view full answer...
The Dexter # 8-219-18UC3 7K trailer hub you mentioned includes cone style nuts like # 6-109, which help to center a lug centric wheel on the hub. The bearings, races, grease seals and grease caps are included as well. view full answer...
The lug nuts that you see in the pictures for the E-Z Lube Trailer Hub and Drum Assembly, # 84546UC3-EZ, are included with the assembly. The bearings (# L68149 inner and L44649 outer), Races, Seal (10-19), and grease cap are also included. I have included a link to a video featuring this assembly for reference. view full answer...
We do have a 72 inch, 2,200 pound trailer axle with hubs, # 20545I-EZ-72-10, but the hubs are not pre-installed. Everything is included (bearings, seals, races (the races already pressed in), grease caps, and lug nuts) just not pre-mounted.
I have included a link to a video showing an example installation of this axle for you. This axle has hubs with a 5 on 4-1/2 bolt pattern. It is also available with a 4 on 4 bolt pattern # 20440I-EZ-72 with a 2,000 lb capacity. view full answer...
The Dexter Trailer Hub Assembly, part # 42655UC1 does include the hub as well as the bearings, races, seal, grease cap, wheel bolts and lug nuts. I am sorry you found this out after you purchased this somewhere else.
This hub is designed to fit 6,000 lb axles with spindles that need a grease seal with a 2-1/4 inch inner diameter. I have attached a link to a product review for this hub you can check out. view full answer...
Yes, the Titan Electric-Hydraulic Trailer Disc Brake Kit, Part # T4843800, includes the brake pads along with all of the other components required to convert your tandem axle trailer to electric-over-hydraulic disk brakes. This kit is intended for 3500-lb axles, wheels from 14 to 15 inches with a 5-on-4-1/2 bolt pattern, and standard 4-bolt brake mounting flanges.
This kit includes the brake actuator; complete hub/rotor assemblies; bearings, races and grease seals; hydraulic brake lines... view full answer...
The included bearings and seal with the Dexter Trailer Idler Hub Assembly, # 34822545BX, were included with the hub from Dexter. Therefore, the bearings and seal are Dexter approved parts.
Dexter does not manufacturer their bearings and seals for there hubs, but use the highest quality products from vendors with their products. view full answer...
The brake pads are indeed included with Kodiak Disc Brake Kit # K2HR35D-8.
The races are included and are already installed in the rotor and hub assemblies. The bearing kits come with races so you can get the bearings and seals individually. You will need 2 of inner bearing # L68149, 2 of outer bearing # L44649, and for a pair of seals use # RG06-050. view full answer...
The etrailer Trailer Hub and Drum # AKHD-655-6-K does include the races # 25520 and # 15245 for the inner # 25580 and outer # 15123 bearings. If you don't already have the bearings and grease seal # GS-2125DL then we actually have all of them in the kit # BK3-110 which also includes the races.
I have attached some videos that you can check out as well. view full answer...
Yes, the races are pre-installed in the Trailer Idler Hub Assembly for 3,500-lb E-Z Lube Axles part # AKIHUB-545-35-G-EZ-K. You'll simply lube up the bearings and install them along with the grease seal. view full answer...
The Hub Bearing Kit for Lippert, Dexter, and Al-Ko Axles part # BK2-100 contains the following parts:
1 L44649 Bearing
1 L68149 Bearing
1 L68111 Race
1 L44610 Race
1 10-19 Grease Seal
1 Cotter Pin
1 Tang Washer
It would be far more cost effective to purchase the kit but we do offer each of these parts individually which I have listed for you below.
L44649 Bearing part # L44649
L68149 Bearing part # L68149
L68111 Race part # L68111
L44610 Race part # L44610
10-19 Grease Seal part #... view full answer...
The Bearing Kit # BK3-310 includes the following parts.
Inner Bearing # 25580
Inner Race # 25520
Outer Bearing # LM67048
Outer Race # LM67010
Spindle Washer # 5-101
Cotter Pin # 165649
Grease Seal # GS-2125DL
The Spindle Washer # 5-101 is the washer that you are looking for. view full answer...
The Dexter # 8-258-5UC1 uses the same inner and outer bearing, L68149 which has a 1.063 inner diameter. The hub uses a 10-9 grease seal, which has a 1.987 inch outer and a 1.5 inch inner diameter. I've linked you to a product description video for the hub. The hub includes the bearings, races, grease seal, lug nuts and dust cover. view full answer...
The Trailer Hub and Drum Assembly - 5.2K and 6K E-Z Lube Axles - 12" - 6 on 5-1/2 - Pre-Greased # AKHD-655-6-EZ-K you were looking at come as a quanitity of one hub. This hub includes the inner and outer bearings, inner and outer races, grease seal, grease cap, and lug nuts needed.
You will need two of the # AKHD-655-6-EZ-K per axle.
I included a few videos of the # AKHD-655-6-EZ-K for you to take a look at. view full answer...
Trailer hub # AKIHUB-545-2-2K does have the races already pressed in but the bearings are not installed and it is not pre-greased. We have # CE13311 but the seal that comes with it has an inner diameter of 1.249 inches. For a 1.5 inch seal that will fit in its place use # 10-9. view full answer...
The Dexter Nev-R-Adjust Electric Trailer Brake Kit # 23-468-469 comes only with the brake assemblies. For the correct bearing kit that fits hub and drum assemblies like part # AKHD-545-35-EZ-K or # 84656UC3-EZ which are used with these brakes you need Kit # BK2-100. This comes with an # L44649 bearing and matching race, an # L68149 bearing and matching race, plus a 10-19 seal with an ID of 1.719" and an OD of 2.565" as well as a cotter pin and tang washer.
I have attached installation... view full answer...
Yes, the Grease Seals # RG06-050 are simply a 2 pack of the Seal # 58846. Both are the correct replacements for your seals marked GS-1719DL. We do have the Bearing Kit # BK2-100 which I recommend keeping on hand. This will give you a set of replacement bearings, races, and grease seal for one hub of your 3,500lb axle. view full answer...